A couple of Fridays ago (16th March) I went along with a friend to a drift day at Oulton Park race circuit. Thankfully I had managed to get the Skyline road legal and ready prior to the event which meant I would be drifting my own car (Yay!!)
As you can imagine the day started extremely early, we hit the road at 5:30 am and arrived at the track just before 7:30 am. Unloaded the cars, tools and spare wheels and then went to sign on and get some breakfast.
Then while we were waiting for briefing we got our cars ready to hit the track, in my case swapping out the 18's on the rear for a pair of my 16" drift wheels and checked the tyre pressures etc.
Once Briefing was over we were told to report to the first of the two tracks they have (for the drift day) and line up in pairs ready for the sighting lap. After we had completed the sighting laps it was pretty much up to us which track we then chose. I opted to start on the track 1 as it was known since I felt it would be the best to give the Skyline a bit of a shakedown.
There were a few problems to start with, the main one being that the last time I had drifted was back in September of last year at Teeside, so I was a little out of practice. The next was that it had been raining heavily prior to our arrival so the track was soaked and even if it hadn't rained the organisers would have soaked the track to keep the "tyre noise" down. The other issue was that for some reason I could get no front end grip so turning in to initiate turned into understeering off of the track.
The lack of front grip was really frustrating, and before long I came off the track and to try and rectify the problem. First I tried lowering the tyre pressures on the front. Sadly this didn't work. Then I decided I would swap out the front wheels for the rears. The wheels I had been using to drive around on were a set of 18inch Lehrmeister Riverside split rims, they were staggered fitment so the fronts are 8 inches wide and the rears are 9.5 inches wide.
Now with a much wider wheel on the front, I finally attained enough front grip to allow me to initiate... now all I had to do was get used to the extremely slippery surface on the wet track.
After a while of spinning, going off track and hitting the plastic posts (that we'd been told not to hit during briefing) I was finally starting to get back into it and feel less and less frustrated with myself and the car.
As the day went on I found that there were moments where I would consistently get things right and then others where I would get things wrong and end up spinning like a top.
Overall the day was good for getting back into things after a few months off and definitely got a good amount of seat time and I would drift at Oulton Park again, however, there were one or two downsides for me:
- Getting sin-binned because of an overzealous newbie marshall who decided to report even the slightest spin out on his section of track.
- The track conditions, I understand that they have to keep the peace with residents who may live near the track but I think on this particular day the GT cars that were hooning around the main circuit were probably making more noise than any drifting could. (Having said that the wet track conditions may have highlighted some previously unknown set up issues with the car, so who knows.)
- Spending 20 minutes when I got home cleaning the car, I know some people wouldn't have bothered but for me, even though it currently looks like something not even Frankensteins monster would be seen dead in I didn't want it looking like I didn't care.